Hydrogeochemical and biomedical insights into germanium potential of curative waters: a case study of health resorts in the Sudetes Mountains (Poland)

Germanium is considered to be a non-essential element; however, little is still known about its significance for living organisms. It exerts prophylactic and therapeutic effects in the treatment of serious diseases such as cancer, HIV infection, and others. Germanium does not exhibit acute toxicity, but, as it tends to accumulate in various organs and tissues, undesirable and even dangerous side effects have been reported after prolonged and/or high dosage application. In general, inorganic compounds of germanium are more toxic than its organic compounds. Further studies should be performed to elucidate the exact molecular mechanism of germanium action, to determine the safe and effective dose of germanium via curative/mineral waters, and to understand the applications and benefits of using germanium-enriched waters in balneotherapy. The geochemistry of curative (cold CO₂-rich, thermal) waters from spas in the Sudetes (Poland) was clarified in terms of components and mineral phases which might govern germanium. Germanium and silicon in thermal (above 20 °C) waters presumably result from the solubility of silicates in crystalline (granites, gneisses) aquifer rocks and might be controlled by neo-formed quartz. The cold CO₂-rich waters revealed a significant diversity of aqueous chemistry and relationships of germanium with iron, silicon, or arsenic. Locally, both in sedimentary (sandstones) and metamorphic (gneisses) aquifer rocks, primary (silicates) and/or secondary (oxides) iron-containing minerals likely release germanium into solution. In the CO₂-rich waters of the western part of the K?odzko Region, germanium distinctly correlates with arsenic. It is hypothesized that both elements are co-sourced from crystalline basement and/or migration of substances of post-magmatic origin along deep-seated dislocations related to the seismically active Po?í?í-Hronov fault zone. This area was proposed as the most prospective one for finding waters rich in germanium in the Sudetes.     

Changes in transport accessibility as a result of flooding: a case study of the Mazovia Province (Eastern Poland)

This paper presents the results of research investigating the impact of flooding on the temporal aspect of transport accessibility at national, regional and local levels in the Mazovia Province – an administrative region in Poland. For the purposes of this study the authors measured the theoretical journey times by private transport between settlement units for two variants: journeys made under normal circumstances, that is, without a flood; and journeys made during a flood event, which would necessitate diversions to avoid flooded road sections. This allowed the theoretical journey time differences to be calculated. It was assumed that vehicles move at the highest permissible speed along routes allowing the shortest travel times. The methods of accessibility assessment employed in this paper are based on distance measurements and use isochrones and a cumulative approach. Analysis carried out by the authors has shown that for interregional, intraregional and local journeys, the flooding of a part of the Mazovia region results in changes in travel times, but their absolute and relative magnitudes vary widely. It was found that in the case of national scale journeys the majority of relative journey time increases were no greater than three times the normal duration, while on a local scale they do not exceed 75%. For areas with a high risk of flooding there should be obligatory analyses of changes in transport accessibility; this would facilitate effective flood risk management. Appropriate traffic management in crisis situations would facilitate emergency and rescue services and help inhabitants and any other persons in flooded areas.     

The Influence of Anchor Devices on the Performance of Retractable Type Fall Arresters Protecting Against Falls From a Height

Retractable type fall arresters are part of the equipment used for protecting people against falls from a height. They are an intermediate part between full body harness worn by a man and the structural anchor at the worksite. The most important task of retractable type fall arresters is to arrest people’s falls and to reduce their harmful consequences. Information received from users as well as laboratories testing protective equipment indicates that the performance of such equipment is incorrect under specific conditions. The paper is concerned with an analysis of the conditions in which retractable type fall arresters demonstrate intermittent performance and with an explanation of that phenomenon. The results of tests investigating anchor devices and the performance of retractable type fall arresters are presented. External and internal factors contributing to intermittent performance have been determined and guidelines for safer use of these devices have been developed.     

Identification of Driver Model Parameters

The paper presents a driver model, which can be used in a computer simulation of a curved ride of a car. The identification of the driver parameters consisted in a comparison of the results of computer calculations obtained for the driver-vehicle-environment model with different driver data sets with test results of the double lane-change manoeuvre (Standard No. ISO/TR 3888:1975, International Organization for Standardization [ISO], 1975) and the wind gust manoeuvre. The optimisation method allows to choose for each real driver a set of driver model parameters for which the differences between test and calculation results are smallest. The presented driver model can be used in investigating the driver-vehicle control system, which allows to adapt the car construction to the psychophysical characteristics of a driver.     

Deposition and Retention of Ultrafine Aerosol Particles in the Human Respiratory System. Normal and Pathological Cases

The particle number concentration in ambient air is dominated by nanometersized particles. Recent epidemiological studies report an association between the presence of nanoparticles in inhaled air at the workplace and acute morbidity and even mortality in the elderly. A theoretical model of deposition of 20 nm particles in the human alveolus was formulated. Gas flow structure and deposition rate were calculated for alveoli with different elastic properties of lung tissue. Data obtained in the paper show increased convective effects and diffusional rate of deposition of nanoparticles for alveoli with higher stiffness of the alveolar wall. The retention of deposited particles is also higher in these pathological alveoli. Results of our calculations indicate a possibility of existence of a positive loop of coupling in deposition and retention of nanoparticles in the lung with pathological changes.     

The Moderating Role of Hardiness and Social Support in the Relation Between Job Stressors and Well-Being. A Lesson From a Clerical Women Sample

The study concerns the moderating role of two variables—hardiness and social support—in the relation between job stressors and well-being. It was checked if there is a connection between hardiness and social support, and if these variables are directly related to the level of well-being. It was also hypothesized that hardiness and social support buffer the negative influence of stressors on well-being. The fact that social support and well-being are multidimensional variables was taken into account.

The cross-sectional study was conducted on a group of 200 women employed as office workers. The results showed that hardiness correlates with the indexes of emotional support as well as practical support coming from supervisors. The connection, however, was not strong. Hardiness and social support were directly connected with the level of well-being. Interaction of these two independent variables played a marginal role. As far as the buffering role of these variables was concerned, the results have shown that hardiness did not play a buffering role and social support did to a limited degree only.

The results of the study proved that it is justifiable to treat social support and well-being as multidimensional variables.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

Experimental Verification of the Computerized Method for Work Space Optimization in Conditions of Static Work

The aim of this study was to verify a theoretical model for upper extremity work space optimization. In order to do that, experimental studies were conducted in which two parameters of the electromyography (EMG) signal were analyzed: AMP (amplitude calculated as Root Mean Square) and SZC (coefficient of the slope of the regression line between time and Zero Crossing values). Values of forces in muscles (parameter MOD) were calculated from theoretical studies. A comparison of experimental (AMP, SZC) and theoretical (MOD) parameters was performed by analyzing the coefficient of correlation between those parameters and differentiation of muscular load according to external load value. Analysis showed that the theoretical and experimental results are in step, which means that the developed model can be used for upper extremity work space optimization.     

Force-Velocity Characteristics of Individual Human Skeletal Muscles: TBCIat and TBCIong. Outline of the Method

The aim of the work is to outline a procedure of finding force-velocity (F–V) characteristics (F = f(V)) of individual skeletal muscles of the human locomotor system. The presentation is based on an example concerning extensors of the elbow joint: the lateral and long heads of triceps brachii (TBCIat and TBCIong). The experimental part of the procedure involves a natural movement of using the upper extremity to push an external object of variable, adjustable load, engaging both the elbow and shoulder joint.

Five men aged 23 took part in the experiment. Their task was to push the handle of a physical pendulum whose moment of inertia could be adjusted within the range of 58 kg m²-450 kg m², so as to give it maximum angular velocity. During each trial the movement of the trunk, of the upper extremity and of the pendulum was video recorded and the force applied with the hand to the handle of the pendulum was measured.

In order to find the F–V characteristics a simulation model SHOULDER was used, which is capable of solving the synergy problem for muscles of the arm and the shoulder girdle.

It was found that despite considerable dispersion of experimental points the respective regression lines revealed a clear tendency of decreasing muscle force for increased shortening velocity of the monoarticular head (TBCIat) and of increasing muscle force for increased lengthening velocity of the biarticular head (TBCIong) of the triceps brachii muscle.     

Analysis of Conditions and Organization of Work of Notebook Computer Users

Abstract

Aim. The aim of this study was to evaluate working conditions with a notebook computer (notebook) as a potential cause of musculoskeletal disorders. Material and methods. The study had 2 stages. The first one was a questionnaire survey among 300 notebook users. The next stage was an expert analysis of 53 randomly selected workstations. The questionnaire survey included questions about the participants, their working conditions, work organization and also duration of work with a notebook. Results and conclusions. The results of the research showed that most examined operators used a notebook as a basic working tool. The most important irregularities included an unadjustable working surface, unadjustable height of the seat pan and backrest, unadjustable height and distance between the armrests and no additional ergonomic devices (external keyboard, docking station, notebook stand or footstool).